Industry guide · UK rules checked

Candle labels: CLP hazard labels and safety warnings for UK sellers

Candle labels for scented candles, wax melts and diffusers often have to carry a CLP hazard label, because the fragrance can make the product a hazardous mixture, as well as fire safety warnings. This guide sets out what the CLP Regulation says a hazard label must contain, the minimum sizes, and how to get labels printed that fit a small tin or jar.

  • What goes on a CLP label, from the legislation
  • Minimum label and pictogram sizes
  • Fire safety warnings and batch codes
  • ICO registered ZA810991
  • UK company 11135452
  • Rules checked 18 November 2026
Free quotes

Get quotes for candle labels

Free, no obligation. Three quick steps.

Your labels
The spec
Your details

ICO registered ZA810991 No obligation For businesses

Candle labels and CLP: key points
  • A substance or mixture classified as hazardous and supplied in packaging must carry a label with the supplier's name, address and phone number, the nominal quantity, product identifiers, and where applicable hazard pictograms, a signal word, hazard statements, precautionary statements and supplemental information (CLP Article 17).
  • Whether your candle or wax melt needs a CLP label depends on its classification, which comes from the fragrance's safety data sheet. Unscented candles usually only need fire safety information (Trading Standards and British Candlemakers Federation advice).
  • The label must be in English, firmly fixed to the packaging that directly holds the product, and readable horizontally when the package is set down normally (CLP Articles 17 and 31).
  • For packages up to 3 litres, the CLP information should, if possible, take up at least 52 × 74 mm, and each pictogram must be at least 1 cm² (CLP Annex I).
  • Hazard pictograms are a black symbol on a white background in a red-framed diamond.
  • Statements such as 'non-toxic' or 'non-harmful' that conflict with the classification aren't allowed on the label or packaging (CLP Article 25(4)).
  • Candles must also be safe under the General Product Safety Regulations 2005; unsafe candles are recalled through the government's product safety notices.

Do scented candles and wax melts need a CLP label?

Short answer

If the finished product is classified as hazardous, yes. Fragrance oils often contain substances that make a scented candle, wax melt or diffuser a classified mixture, so it needs a CLP hazard label. Unscented candles usually aren't classified, but still need fire safety information. Your fragrance supplier's safety data sheet gives the data to work it out.

Based on the Candlemakers advice pack (January 2024), joint advice from Cornwall Council Trading Standards and the British Candlemakers Federation
ProductGeneral product safetyCLP hazard labelCandle fire safety warnings
Unscented candlesYesUsually not (not classified)Yes
Scented candlesYesYes, if the mixture is classifiedYes
Wax meltsYesYes, if the mixture is classifiedNot the candle warnings
Reed diffusersYesYes, if the mixture is classifiedNot the candle warnings
A label printer prints the CLP elements you give them; they don't classify your product. Work out the classification from your fragrance supplier's safety data sheet and the fragrance load you use, or get a specialist to do it, before the artwork is designed. Even a mixture that isn't classified can need the statement 'Contains (name of sensitising substance). May produce an allergic reaction' (EUH208) if it contains a sensitiser at or above the threshold (CLP Article 25(6) and Annex II, section 2.8). For questions about CLP, HSE runs a UK CLP helpdesk.

What must a CLP label on a candle contain?

Short answer

The supplier's name, address and telephone number; the nominal quantity (unless shown elsewhere on the pack); the product identifiers; and, where they apply, hazard pictograms, a signal word, hazard statements, precautionary statements and supplemental information such as an allergen warning.

EXAMPLE LABEL · NOT A REAL PRODUCTFig & Cedar Candle180 gBatch C2611WARNING ⚠ May produce an allergic reaction.Contains: [named fragrance allergens from yourSDS].[Hazard (H) and precautionary (P) statementsand any pictograms that match yourclassification]Never leave a burning candle unattended. Keepaway from things that can catch fire. Keepaway from children and pets.Example Candle Co. Ltd, 4 Sample Lane, Anytown AB1 2CD ·01234 5678901234567
  1. Product identifier the product name, plus the identity of the substances that drive the classification (from your SDS).
  2. Nominal quantity unless it's specified elsewhere on the package.
  3. Batch number not a CLP element, but helps traceability and recalls (Trading Standards advice).
  4. Signal word and allergen statement for example 'Warning', with supplemental information naming sensitising substances where required.
  5. Hazard and precautionary statements the H and P statements that match the classification, plus any pictograms.
  6. Fire safety warnings the candle safety warnings and symbols, separate from CLP.
  7. Supplier details name, address and telephone number of the supplier.
Illustration only: the wording in brackets is a placeholder. Your actual signal word, statements, pictograms and named substances come from your product's classification. Don't copy this wording.

The label elements must be clearly and indelibly marked, stand out from the background, and be big enough and spaced enough to read easily (CLP Article 31). That's a print question as much as a design one: ask for a material, ink and finish that won't rub off or smudge when the candle is handled or warm.

What size does a CLP label have to be?

Short answer

For packages up to 3 litres, the area for the CLP information should, if possible, be at least 52 × 74 mm, and each pictogram at least 10 × 10 mm (if possible 16 × 16 mm). Each pictogram must cover at least one fifteenth of that minimum label area and be no smaller than 1 cm².

CLP Annex I, Table 1.3, as it applies in Great Britain (legislation.gov.uk), checked 18 November 2026
Capacity of the packageLabel area for the CLP informationEach pictogram
Not exceeding 3 litresIf possible, at least 52 × 74 mmNot smaller than 10 × 10 mm; if possible, at least 16 × 16 mm
Over 3 litres, up to 50 litresAt least 74 × 105 mmAt least 23 × 23 mm
Over 50 litres, up to 500 litresAt least 105 × 148 mmAt least 32 × 32 mm
Over 500 litresAt least 148 × 210 mmAt least 46 × 46 mm

Most candles and wax melts are in the first row. On a small tin or a clamshell of wax melts, 52 × 74 mm is a lot of space, and the rule says 'if possible'. Printers have ways to make room: a separate CLP label on the base, a wrap-around label, or a fold-out (peel-and-reveal) label. Pictograms are always a black symbol on a white background inside a red diamond frame wide enough to see clearly.

Where does the CLP label have to go on a candle?

Short answer

Labels must be firmly fixed to one or more surfaces of the packaging that directly holds the product, and be readable horizontally when the package is set down normally. The candle's fire safety warnings sit separately from the CLP elements.

Ready to price your labels?Send one brief and a specialist UK label printer will come back with a quote.
Get quotes

Which fire safety warnings go on candle labels?

Short answer

Candles are expected to carry fire safety warnings and symbols; the joint Trading Standards and British Candlemakers Federation advice points to BS EN 15494:2019, the standard for candle product safety labels. Candles must be safe under the General Product Safety Regulations 2005.

The joint advice lists three mandatory supplementary safety messages from BS EN 15494 for candles: never leave a burning candle unattended; keep away from things that can catch fire; keep away from children and pets, alongside the standard's safety symbols. Some candle types need more, such as a heat-resistant candleholder, and there are optional messages such as not burning in a draught or trimming the wick. The standard itself is sold by BSI, so check the current version or your trade association for the exact symbols and layout.

Unsafe candles are recalled: GOV.UK product safety notices include scented candles recalled because they could burn in an uncontrolled way and didn't meet the General Product Safety Regulations 2005 (example recall notice).

Which labels work on candle jars, tins and wax melts?

Short answer

Candle labels meet warm glass, fragrance oil and handling. Ask for materials and adhesives that tolerate warmth and oils, with a laminate or varnish to protect the print, and test them on a burning candle before you order a full run.

Warm glass

Jar labels get warm as the candle burns; some adhesives soften. Test a burn cycle with samples.

Fragrance oil

Oils can mark paper and soften some adhesives. Film or laminated labels resist them better.

Tins and clamshells

Small curved or flat surfaces: shaped labels, base labels or wrap-arounds help fit the CLP area.

Premium look

Textured papers, foil and clear 'no-label look' films, checked for CLP legibility.

Batch codes

Leave a panel for batch numbers you print in-house, or ask about variable-data printing.

Many scents

One base design with a different CLP panel per fragrance: ask how the printer handles many versions in one order.

Each fragrance can have a different classification, so each scent may need its own CLP panel. Keep a version list matching scent, fragrance load and label wording, and check it against every proof.

Get quotes for your labels

Tell us about the labels once. We pass your brief to a specialist UK label printer suited to your job, who will:

  • Check the spec with you: size, material, adhesive, finish, roll or sheet, and how the labels will go on.
  • Quote in writing for your quantity, with any set-up, plate or proof costs shown.
  • Proof before printing, so you can check the artwork and the legal text.

For business orders. Prefer email? Write to hello@labelprintinghub.co.uk with your label size, quantity and what they're for.

Free quotes

Tell us about your labels

Three quick steps. Free and no obligation.

Your labels
The spec
Your details

ICO registered ZA810991 No obligation For businesses

Candle labels and CLP: frequently asked questions

Do candles need CLP labels in the UK?

Scented candles, wax melts and diffusers need a CLP hazard label if the finished product is classified as hazardous, which often happens because of the fragrance. Unscented candles usually aren't classified but still need fire safety information. The classification comes from your fragrance supplier's safety data sheet.

What information goes on a CLP label?

The supplier's name, address and telephone number, the nominal quantity, the product identifiers and, where they apply, hazard pictograms, a signal word, hazard statements, precautionary statements and supplemental information (CLP Article 17).

What size does a CLP label need to be?

For packages up to 3 litres, the CLP information should, if possible, take up at least 52 × 74 mm, with each pictogram at least 10 × 10 mm (if possible 16 × 16 mm) and never smaller than 1 square centimetre.

Can I put the CLP label on the bottom of a candle?

The label must be firmly fixed to the packaging that directly contains the product and be readable horizontally when the package is set down normally. If you're unsure whether a base label meets this for your product, ask your local Trading Standards service.

Do wax melts need CLP labels?

If the wax melt is classified as hazardous, yes. The joint Trading Standards and British Candlemakers Federation advice says diffusers and wax melts contain fragrances, so the CLP requirements apply to them.

Can I say my candle is non-toxic?

Not on the label or packaging if it conflicts with the classification: CLP Article 25(4) prohibits statements such as 'non-toxic' or 'non-harmful' that indicate the product isn't hazardous or are inconsistent with its classification.

Does a label printer check my CLP wording?

No. The printer prints the label elements you supply. Classification and wording are the supplier's responsibility; use your fragrance supplier's safety data sheet, a specialist, or HSE's UK CLP helpdesk for questions.

What labels stick to candle jars?

Labels with an adhesive that tolerates warmth and fragrance oil, often on a film or laminated face material. Test samples through a full burn before ordering a run.

Sources

We checked the facts on this page against these sources on 18 November 2026. Rules change: check the current version before you sign off a label.

  1. Regulation (EC) No 1272/2008 (CLP), Article 17: general labelling rules (legislation.gov.uk)
  2. CLP Article 25: supplemental information, including the ban on 'non-toxic' statements (legislation.gov.uk)
  3. CLP Article 31: general rules for the application of labels (legislation.gov.uk)
  4. CLP Annex I, section 1.2.1: minimum label and pictogram sizes (legislation.gov.uk)
  5. CLP Annex II, section 2.8: EUH208 for mixtures containing a sensitising substance (legislation.gov.uk)
  6. The hazard label (Health and Safety Executive)
  7. Candlemakers advice pack, January 2024: joint advice from Cornwall Council Trading Standards and the British Candlemakers Federation (PDF)
  8. Product recall: scented candles presenting a risk of fire (GOV.UK, Product Safety Database notice)